FPT Industrial was premier sponsor and exhibitor at Powergen International in Dallas (Texas, USA), the largest network and business hub for power generators, displaying its cutting-edge Stage V/Epa Tier 4 Final engine technology, including the F36, N67 and Cursor 9. The efficient N67 Tier 3, and the engine of the future, the Cursor X, completed the line-up. 

Featuring patented HI-eSCR technology to meet the most demanding emission regulations, FPT Industrial’s dual certified Stage V/EPA Tier 4 Final, DPF-free and ATS maintenance-free range delivers best-in-class uptime, ease of installation, and exceptional fuel efficiency, for reduced cost of ownership. 

FPT Industrial F36 Stage V/Tier 4 Final 

The F36 stands out for its power density, offering an increase of 25% on previous generations, covering up to 100 kVA for the most demanding applications. Add in low operating costs and exceptionally easy maintenance, and you have the ideal unit for the most demanding missions.

Thanks to the lowest EGR rate in the market (<10%) and optimized Cooling Pack, the F36 offers high performance in a compact layout – a ready-to-run system, featuring pre-assembled G-Drive and ATS. One-side serviceability allows for fast and easy maintenance, while the possibility to switch from 1,500 to 1,800 rpm for all customer requirements (50/60Hz) helps minimize warehouse stock. 

F36 Stage V/Tier 4 Final

N67 Stage V/Tier 4 Final

Developed to satisfy the most demanding customer requirements, the N67 is the perfect proof of FPT Industrial’s technological excellence. The maintenance-free ATS, featuring 5th generation Hi-eSCR technology, delivers optimized urea consumption, down to 6.3% (av. 8%). The EGR-free combustion maximizes power, optimizes fuel efficiency, and enhances reliability thanks to its lean engine layout. All these state-of-the-art technical solutions allow engine uptime to be maximized with the minimum oil quantity (oil system capacity 17.5 l). Warehouse stock minimization comes courtesy of the possibility to switch from 1,500 to 1,800 rpm for all customer requirements (50/60Hz). 

N67 Stage V/Tier 4 Final

Cursor 9 Stage V/Tier 4 Final 

Designed for prime and stand-by applications, Cursor 9 offers top power, fast load response and best-in-class total cost of ownership with high power density. High efficiency, proven reliability, long maintenance intervals, and premium performance make this power unit the state-of-the-art of engine for power generation. An extremely compact second-generation Common Rail system and EGR-free architecture allow for a compact footprint and low running costs. This ready-to-run system, with Cooling Pack and Air Cleaner pre- mounted for fast and easy installation, offers the possibility to switch from 1,500 rpm to 1,800 rpm for all customer requirements (50/60 Hz) in order to minimize warehouse stock. 

Cursor 9 Stage V/Tier 4 Final 

N67 Tier 3 

The N67 Tier 3 engine offers impressive power and load acceptance with top-class levels of reliability and efficiency. FPT Industrial’s patented Common Rail injection system guarantees low fuel consumption (fuel savings of up to 10% vs. premium brand competitors), while 600- hour service intervals keep operating and maintenance costs down. Optimized installation footprint and reduced logistical costs complete the all-round efficiency of this solid and straightforward power generation solution. 

Cursor X 

FPT Industrial’s Cursor X 4.0 Power Source Concept is symbolic of the Brand’s conception of innovation, also reflecting its product strategy vision, and underlining its commitment to research and development into alternative fuels. The Cursor X is “designed for Planet Earth” and characterized by four “M’s”: Multi-power, Modular, Multi-application and Mindful. 

The Cursor X concept would adapt to provide the most suitable solution for the customer’s business and mission, whether based on natural gas internal combustion, hydrogen fuel cell electric generation, or battery-stored energy.
Modular: one engine, customized performance 

The power source concept would be the same size as an internal combustion engine, with a modular architecture that allows easy assembly, vehicle integration, servicing, and full scalability.
Multi-application: endless possibilities 

Thanks to its wide range of options, the Cursor X is designed to supply energy for traction, auxiliary systems, implements, and PTOs to any kind of industrial vehicle or machine – from delivery vans and buses, small dozers and crawler excavators, to specialty tractors and combines.

Cursor X


Related articles

Kubota to present new engines at bauma 2022

As part of its stand at bauma 2022, Kubota will present two new engines featuring state-of-the art technology which expand the fully electronically controlled engine line-up below 19 kW and enhance the company’s low carbon credentials.