Arbos 7000 Series with 6-cylinder Fpt Industrial engine

Arbos has recently presented its full line of tractors and equipment. The new star of the scene is the Series 7000 range. The co-protagonist comes under the Fpt industrial brand, instead, and we are talking about the Stage V engine that powers this new series.

The 7000 Series, in fact, is composed of three models (Arbos 7220, Arbos 7240 and Arbos 7260), all equipped with 6-cylinder Fpt engines. We are talking, in particular, about the N67 Stage V engines. With a displacement of 6,800 cubic centimeters. Capable of providing a maximum power of 191 kW (which can reach up to 206 kW in overpower) at 1,900 rpm. With a maximum torque of 1,100 Nm at 1,400 rpm. The peculiarity of the N67 is the HI-eSCR2 post-treatment system, that can specifically meet Stage V emission standards.

The Advanced+ transmission is characterized by 5 gears coupled to a 4-speed powershift gearbox (called ‘implement powershift’). Together with an electro-hydraulic powershuttle reverser for a total of 60 forward and 15 reverse gears.


There are also the Carraro suspension bridge and the HI-Vision Maxi cab

The hydraulic system is closed center with a load sensing piston pump of 160 liters per minute of flow. According to the data sheet, the maximum capacity of the rear linkage is 11,500 kilos. The front axle is available either fixed or suspended. The latter is supplied by Carraro and is characterized by independent hydraulic suspensions with a quadrilateral pattern on the hubs.

arbos 7000

The wide HI-Vision Maxi cab offers a good level of comfort, ergonomics and visibility. From the pneumatic suspension seat the operator can control all the tractor’s functions, from the reverser under the steering wheel, to the comfortable gear lever, up to the hydraulic and electronic functions, enclosed in the multifunction armrest. All operations can be viewed from the on-board interface, designed to integrate the functions of Isobus technology and precision farming.



Volvo Penta range expands with D13 solutions

Volvo Penta has expanded its marine IMO Tier III range with new D13 solutions, demonstrating the company’s commitment to exceeding today’s best practice while in parallel innovating future technologies.

FPT Industrial at The World Biogas Expo with the Smart Hybrid Hub

At The World Biogas Expo 2022, the world’s leading trade show dedicated to the biogas industry, FPT Industrial showcased its solution for power generation fueled by renewable resources: the Smart Hybrid Hub, the world’s first variable speed low-pressure natural gas, hybrid, multi-mode, genset.

Related articles

Kohler Engines at Hillhead 2022

Kohler attended Hillhead, the iconic trade show dedicated to the quarrying, construction and recycling industries, that this year celebrates its 40th anniversary. Kohler was there with a booth that this year did not speak only to OEMs but also to the rental world.