Wärtsilä and the utility from the same area, Vantaa Energy Ltd, have signed a co-operation agreement for pre-engineering and development of a Power-to-Gas (P2G) plant for Vantaa Energy. According to Wärtsilä, the plant planned to be commissioned in 2025 would be the largest in Finland and also the first to produce carbon-neutral, synthetic methane on a commercial scale with a fuel capacity of 10 MW. Synthetic methane is produced from captured carbon dioxide and hydrogen produced with renewable energy. The EU has set a common target of climate neutrality by 2050, and has recently raised its emissions reduction target to 55% by 2030. Finland aims for carbon neutrality by 2035.

Wärtsilä Power-to-Gas: synthetic methane from renewable electricity sources

The Power-to-Gas plant will allow Vantaa Energy to start using electricity produced from renewable sources for reducing CO2 emissions in district heating, other applications where gas is used, and transportation. Wärtsilä will lead the pre-engineering phase of the project. Once completed, the project will produce synthetic methane from renewable electricity sources by extracting hydrogen from water, as well as extract CO2 out of emissions from an existing waste to energy plant. The resultant methane will be sufficient for use in up to 200 trucks per day, and replace conventional, fossil natural gas in district heating during heating peaks in winter.

«The unique and excellent location of the plant has many advantages. We have access to clean water and renewable electricity using wind energy, and the waste heat produced in the process can be utilised for district heating. The location also enables connections between the electricity, heating, and transport sectors. The energy sector plays a significant role in climate change mitigation, and we are in the vanguard of contributing to a speedy transition to clean energy production», said Jukka Toivonen, CEO of Vantaa Energy.

Potrebbe interessarti

Accelerate the move towards decarbonisation

«The clock is ticking and we need to accelerate the move towards decarbonisation before it’s too late. This project showcases our vision of working towards a 100% renewable energy future, in which sector coupling and future fuels will play a decisive role. By cooperating with Vantaa Energy in this state-of-the-art project with us leading the pre-engineering, we are developing our Power-to-X technology and integration competences to meet future market needs. Collaboration with customers and other stakeholders supports our vision», said Saara Kujala, General Manager, Business Development, Wärtsilä Energy.

Wärtsilä has modelled cost-optimal, 100% renewable energy systems for 145 regions and countries. The results indicate that 100% renewable energy systems need over 900 GW of P2G capacity for long-term and seasonal energy storage. Once operational, the plant of Vantaa Energy will also highlight Finland’s support for the European Commission’s plans for the creation of a European hydrogen economy.

Wärtsilä’s pre-engineering work is expected to be completed by the end of 2022, and the project is scheduled for completion in early 2025.

Highlights

FPT Industrial: let’s go, XC13

The XC13 surely sounds agnostic in FPT Industrial’s unofficial nomenclature; it comes, indeed, with a tripartite certification: Euro 6E (winking an eye at the upcoming Euro 7), methane gas and also biofuel, with a link to hydrogen. Andrea Abbà, FPT’s product marketing manager, told us about dialogui...

Shipping vs on-road: is LNG the only way?

The Green Shipping Challenge at COP28, held in the presence of the CEOs of the five largest shipping companies, ended in a dead heat. The comparison with the four-wheeled world is ruthless. Large commercial marine applications work on almost a continuous cycle, and have a very exorbitant CO2 balance...

Related articles